PCB Piezotronics IMI SENSORS EX641B02 Installation And Operating Manual page 43

CSA
(
Ep
GROUPIrm
Models EXHTTO(M)64x (with connector or integral cable), Vibration and Temperature Sensors, input rated 28V
dc max, 20mA; intrinsically safe when installed per installation drawing 72010 (sheet 1);
Models EXHT(M)64x (with conduit connection), Vibration Sensors, input rated 28V dc max, 20mA; intrinsically
safe when installed per installation drawing 71993 (sheet 1);
Models EXHTTO(M)64x (with conduit connection), Vibration and Temperature Sensors, input rated 28V dc
max, 20mA; intrinsically safe when installed per installation drawing 72068 (sheet 1);
Ex ic TIC; AEx ic IIC; Class I Division 2 Groups A, B, C and D;
Tamb:
-40C to 121C; Tcode: T3C
Models EXHT(M)64x (with connector or integral cable), Vibration Sensors, input rated 28V dc max, 20mA;
suitable for use in Class I, Div. 2/ Zone 2 (Ex ic) locations when per installation drawing 71991 (sheet 2);
Models EXHTTO(M)64x (with connector or integral cable), Vibration and Temperature Sensors, input rated 28V
dc max, 20niA; suitable for use in Class I, Div. 2/ Zone 2(Ex ic) locations when per installation drawing 72010
(sheet 2);
Notes:
1. Sensor must be installed in a suitable enclosure, acceptable to the local inspection authority having
jurisdiction.
2.
The "x" is a series of letters and numbers in the model for different variations including variation in
frequency response, top cable entry, side cable entry and other differences not critical to certification.
3. M in the model number is optional and to include Metric threading adapters instead of English threading
adapters
CLASS 225802
-
PROCESS CONTROL EQUIPMENT
-
For Hazardous Locations
CLASS 2258 82 - PROCESS CONTROL EQUIPMENT
-
For Hazardous Locations
-
CERTIFIED TO U.S.
STANDARDS
Class I Division 2 Groups A, B, C and D; Tamb: -40C to 121C; Tcode: T3C
Models EXHT(M)64x (with conduit connection), Vibration Sensors, input rated 28V dc max, 20mA; Suitable for
Class I Division 2 when installed per installation drawing 71993 (sheet 2).
Models EXHTTO(M)64x (with conduit connection), Vibration and Temperature Sensors, input rated 28V dc
max, 20mA; Suitable for Class I Division 2 when installed per installation drawing 72068 (sheet 2).
1. Sensor must be installed in a suitable enclosure, acceptable to the local inspection authority having
jurisdiction.
2. The "x" is a series of letters and numbers in the model for different variations including variation in
frequency response, top cable entry, side cable entry and other differences not critical to certification.
3. M in the model number is optional and to include Metric threading adapters instead of English threading
adapters