1 Version : 02
LCIE 05 ATEX 6155
Issue : 02
12 DESCRIPTION DU PRODUIT
L'appareil est un transmetteur de vibration intégrant un cristal
piézoelectrique, un traitement electronique du signal et un
connecteur ou un cable intégré ou des fils volants pour
'interface externe. Le signal délivré est un courant de sortie
dans la plage 4-2OmA correspondant au niveau de vibration.
Los appareils de type EXTO sont équipes dun capteur de
temperature integre. Lappareil, type EXRV, délivre une sortie
de vibration brute dans Ia plage 0-2.5VAC
Les boitiers des têtes de capteur sont réalisés en acier
inoxydable de plusieurs formes, en fonction du type. Les
connexions externes peuvent être effectuées par connecteur
ou cable blindé ou fils volants selon le type.
Equipement disponible en version metrique (type avec M)
Paramètres électrigues:
Tension maximum d'entrée Umax 30V
Puissance maximum
Pmax:
1W
DETAIL DE LA GAMME
DESCRIPTION OF PRODUCT
The apparatus is a vibration transmitter integrating a
piezoelectric crystal, an electronic signal processing and a
connector or a cable or flying leads for external interface. The
delivered signal is an output current in the range 4-20mA
corresponding to vibration level.
Apparatus, type EXTO, are provided with an integrated
temperature sensor. Apparatus, type EXRV, delivers raw
vibration output in the range 0-2.5VAC
Sensor heads are made of stainless steel housings with
several shapes, depending on the type. External connections
can be done by connector or shield cable or flying leads
depending on the type.
Apparatus is available in metric version (type with M).
Electrical parameters:
Maximum input voltage
Umax:
30V
Maximum power
Pmax:
1W
RANGE DETAILS
Types et caracteristiques
/ Types and characteristics
EX(M)64xA0y, EX(M)64xB0y avec connecteur I with connector.
EX(M)64xA1y, EX(M)64xA6y, EX(M)64xB1y, EX(M)64xB6y avec cflble
I with cable.
EXTO(M)64xA3y, EXTO(M)64xB3y avec capteur de temperature et Connecteur /with temperature sensor and connector.
EXTO(M)64xA1y, EXTO(M)64xA6y, EXTO(M)64xB1y, EXTO(M)64xB6y avec capteur de temperature
et
cAble
/with temperature sensor and cable.
EXRV(M)64xAOy, EXRV(M)64xB0y avec sortie vibration brute et connecteur I with raw vibration output and connector.
EXRV(M)64xA1y, EXRV(M)64xA6y, EXRV(M)64xB1y, EXRV(M)64xB6y avec sortie vibration brute et cAble / with raw vibration output and cable.
EX(M)64xB7y avec fils volants I with flying leads.
EXTO(M)64xB7y avec capteur de temperature et fils volants I with temperature sensor and flying leads.
EXRV(M)64xB7y avec sortie vibration brute et fils volants I with raw vibration output and flying leads.
Note: la lettre M indique un équipement en version métrique. Les lettres x et y sent des variables du type (valeurs de 0 a 9).
Note: M letter indicates apparatus in metric version. Letters x and are variable digits of the type (values between 0 and 9).
MARQUAGE
MARKING
Le marquage du produit doit comprendre
The marking of the product shall include the following
Marcuage complet:
Full marking
FOB Piezotronics Inc. ou IMP Sensors ou IMI
PCB Piezotronics Inc. or lMI Sensors or IMI
Adresse
Address:
Type:
Type:
Numéro de fabrication
Serial number:
Année de fabrication
Year of construction:
113 G
113 G
Ex nA IIC T4 Gc
Ex nA 110 T4 Ge
LCIE O5 ATEX B155X
LCIE 05 ATEX 6155 X
-40CC Tamb :5 +80CC
-40'C
:5
Tamb +80eC
AVERTISSEMENT
-
NE PAS SEPARER SOUS TENSION
WARNING
-
DO NOT SEPARATE WHEN ENERGIZED
Seul le texte en francais peut engager la responsabilité du LCIE. Ce document ne paul étre reproduit qua dans son intégralité, sans aucune modification. II est
Otabli en accord avec le référentiel de certification ATEX du LCIE. The LC/Es liability applies only on the French text. This document may only be reproduced in
its entirety and without any change. It is issued in accordance with LClEs A TEX Certification Rules.
CERT
-
ATEX
-
FORM 05 Rev. 02
Page 2 of
4
LCIE
33
Avenue du Gén6ral Leclerc
Laboratoire CentraL des Industries Etectriques
j
92260 Fontenay-aux-Roses
WWWLCIEFR
Une socithté de Bureau Veritas
FRANCE
Need help?
Do you have a question about the IMI SENSORS EX641B02 and is the answer not in the manual?