Table of Contents
Advertisement
These appliances must be installed and serviced by a competent person as stipulated by
the Gas Safety (Installation & Use) Regulations.
IMPORTANT
The installer must ensure that the installation of the appliance is in conformity with these
instructions and National Regulations in force at the time of installation. Particular attention
MUST be paid to:
•
Gas Safety (Installation & Use) Regulations
•
Health And Safety At Work etc Act
•
Local and National Building Regulations
•
Regulatory Reform Order (Fire Safety)
•
Detailed recommendations are contained in Institute of Gas Engineers published
documents: IGE/UP/1, IGE/UP/2
•
BS 6173 and BS 5440-2
•
In IE, IS 820 Non-domestic Gas Installations
These appliances have been CE-marked on the basis of compliance with the Gas
Appliance Directive for the Countries, Gas Types and Pressures as stated on the Data
Plate. Pay particular attention in order not to disturb the air combustion admission or the
combustion products evacuation of the appliance.
WARNING - TO PREVENT SHOCKS ALL APPLIANCES, WHETHER GAS OR
ELECTRIC, MUST BE EARTHED.
On completion of the installation, these instructions should be left with the Engineer-in-
Charge for reference during servicing. After installation / service these Instructions should
be handed over to the User, having had a demonstration of the operation and cleaning of
the Appliance.
Advertisement
Table of Contents
