Table of Contents
Advertisement
the burner skirts.
5. Replace burner caps and skirts upon burner base and ensure the cap location fits
within burner skirt notches. When burner head is properly located, it will not rotate.
6. Light burner to check that it operates correctly.
Note: Ensure that all parts are dried thoroughly prior to relighting.
Note: This process should be followed prior to calling for a Service Engineer.
Failure due to lack of proper cleanings may result in work being charged for.
Oven
Clean while oven is warm but not hot. The enamelled base plate lifts out. The shelf guides
can be removed by removing the four fixings. The oven base is removed by lifting at the
front, and pulling towards you.
Advertisement
Table of Contents
