Porter-Cable CPFC2TV3525VP Instruction Manual page 13

Before Each Start-Up:
1. Set On/Auto/Off lever to "Off".
2. Pull the regulator knob out and
turn counterclockwise to set the
outlet pressure to zero.
3. Visually inspect air hose, replace if
needed.
4. Attach air hose and accessories.
NOTE: The air hose or accessory will
require a quick connect plug if the air
outlet is equipped with a quick con-
nect socket.
the regulator knob out and turn
counterclockwise to set the outlet
pressure to zero when removing
hose or accessories to prevent
whip.
pressure causes a hazardous risk of
bursting. Check the manufacturer's
maximum pressure rating for air tools
and accessories. The regulator outlet
pressure must never exceed the
maximum pressure rating.
Risk of Flying
Objects. Pull
Risk of Bursting.
Too much air
Compressed air from the unit may
contain wa ter condensation and
oil mist. Do not spray un fil tered air
at an item that could be damaged
by moisture. Some air tools and
accessories may require filtered
air. Read the in struc tions for the air
tools and accessories.
How to Start:
1. Set the On/Auto/Off lever to "On/
Auto" and allow tank pressure to
build. Motor will stop when tank
pressure reaches "cut-out" pres-
sure.
2. Pull the regulator knob out and
turn clockwise to increase pres-
sure. When the desired pressure
is reached push knob in to lock in
place.
The compressor is ready for use.
13 - ENG
Risk of unsafe
operation.
D21683