Table of Contents
Advertisement
Landing Gear & Battery Installtion
Battery Straps
( Accessories Bag )
Landing Gear Skid
page 32
Main Blades Installation
6 x M2x6 Self
Tapping Screw
don't over tighten
Satellite
EX
Chapter 17: Landing Gear & Battery Installation /Chapter 18: Main & Tail Blades Installation
Main Blade Lock Note:
In small Heli or in aggressive head design
like oxy 2, 3 and 4 if you fly on hard terrain
MUST set loose.This suggestion will avoid
annoying wobbling on ramp up or landing.
Tail blade need be loose. Set it free to rotate.
About lock thread, to assure the Screw M2x 10
use it but carefully. Apply small amount of lock
thread NOT in the Screw but in the Tail Grip Thread,
using a tooth pick. Be careful about lock thread
contamination on plastic tail blade, lock thread
contains chemical that effect plastics, reducing strength.
After assembly clean carefully any lock
OXY0077-M2X14
Shoulder Button Screw
Main Blades
M2 Self
Lock Nut
Tail Blade
( Box 3 / Bag 8 )
OXY0078 - M2x10
Button Screw
47mm Tail Blade
Advertisement
Table of Contents
