Table of Contents
Advertisement
Ethernet FCode selftest Diagnostic
Type the following to run selftest using the test command:
ok setenv diag-switch? true
ok test <device-path>
Hme register test -- succeeded.
Internal loopback test -- succeeded.
Transceiver check -- Using Onboard Transceiver - Link Up.
passed
Hme register test -- succeeded.
Doing more loopback tests -- passed
ok
The following tests are run when the test command is executed:
hme register
MAC Internal Loopback
100 MByte PHY Loopback
100 MB TP Loopback
10 MB XCVR Loopback
SCSI FCode selftest Diagnostics
Type the following to run selftest using the test command:
ok setenv diag-switch? true
ok test <device-path>
ok
The following register tests are available on the ISP1040B:
PCI Configuration Space Registers
Bus Configuration Registers
RISC Registers
Command DMA Register
SXP Registers
RISC Registers
20
SunSwift PCI Adapter Installation and User's Guide • August 1997
Advertisement
Table of Contents
Need help?
Do you have a question about the SunSwift and is the answer not in the manual?
Questions and answers