Booting From The Network; To Boot From The Network - Sun Microsystems SunSwift Installation And User Manual

Booting from the Network

You can use the SunSwift PCI Adapter Ethernet interface as the boot device.

To Boot from the Network

1. At the ok prompt, type:
ok show-devs
The show-devs command lists the system devices. You should see the full path
name of the hme device, similar to this example:
/pci@1f,2000/pci@2/SUNW,hme@0,1
2. Type:
ok boot /pci@1f,2000/pci@2/SUNW,hme@0,1
Chapter 3 Using the SunSwift PCI Adapter 13