Hardware And Software Requirements; Features - Sun Microsystems SunSwift Installation And User Manual

Hardware and Software Requirements

Before using the SunSwift PCI adapter, make sure your system meets the following
hardware and software requirements:
Hardware and Software
Hardware Requirements
Software Requirements
Firmware
Peripherals Attached to PCI Adapter
SCSI Cables

Features

Following is a list of the SunSwift PCI adapter features:
PCI
PCI Local Bus, Rev 2.1 compliant
32-bit PCI up to 33 MHz
Universal add-in (3.3V and 5V signaling)
Two 64K x 8 OpenBoot Flash ROMs (one per function)
Built-in PCI bridge
PCI Ethernet Interface
32-bit PCI up to 33 MHz
32-bit target access to internal registers
8-, 16-, or 32-bit target access to configuration registers
32-bit master data transfers
Two DMA channels with 2 Kbyte FIFOs
Unique IEEE MAC address stored on board
2 SunSwift PCI Adapter Installation and User's Guide • August 1997
Requirements
Sun™ systems with an available PCI slot
Solaris 2.5.1 Hardware: 4/97 release
OpenBoot™ PROM version 3.0 or greater
All SCSI-2 devices
Only standard, Sun-supported cabling to
ensure reliable SCSI interface connections