Jetter JetViewMobile 205 User Manual page 29

Jetter AG
User Manual – JetViewMobile 205
Key code Description
46 Opens the status mask for the USB update and updates the
variable with the USB information.
47 Starts the update via USB and opens the USB update mask.
48 Opens touch calibration (system-internal mask).
50 Selects edited list object: current element +1 (following ele-
ment).
51 Selects edited list object: current element +2.
52 Selects edited list object: current element +3.
53 Selects edited list object: current element +4.
54 Selects edited list object: current element +5.
55 Selects edited list object: current element -1 (previous ele-
ment).
56 Selects edited list object: current element -2.
57 Selects edited list object: current element -3.
58 Selects edited list object: current element -4.
59 Selects edited list object: current element -5.
68 Opens the KEY TEST data mask.
69 Opens the FLASH TOOL data mask.
90 ... 99 Scrolls through active object pool (90: ECU 1, 99: ECU 10)
102 Scrolls on softkey page;
Becomes relevant, when more softkeys have been configured
than there are hardware keys available.
105 Cancels editing.
Changes to string or numeric variables are discarded.
106 Closes editing with OK.
Manual changes to the variable are saved.
200 Transfers the ID (- 256) of the key that was pressed to the edi-
tor as an ASCII key code.
202 Forwards the ID of the key that was pressed (ID % 100) + 3100
to the value of object pointer 65300.
203 Shows the download mask if a download is active.
Tab. 29: Key codes
Programming | 8
29