Updating The Firmware And System Menu Via Usb - Jetter JetViewMobile 205 User Manual

Jetter AG
Multiple menu
languages
Update preparation
Perform update
User Manual – JetViewMobile 205
To integrate additional menu languages see
menu [} 30].

7.3 Updating the firmware and system menu via USB

The firmware and system menu of the JVM-205 can be updated via USB.
An update cable is required for the update
INFO
Do not update while using
The firmware and system menu must not be updated while the
motor is running or the vehicle is being used.
INFO
This procedure requires an operating system that is already
installed.
ü
The required firmware package JVM-205-K00-O31 _rev_x_x_x_x.zip has
been provided by Jetter Support (support@jetter.de).
1.
Make certain the control unit is turned off.
2.
Connect the 12-V power supply.
3.
Unpack the firmware package JVM-205-K00-O31 _rev_x_x_x_x.zip .
The sequence x_x_x_x represents the firmware version.
4.
Create the EDC file: Creating an EDC file.
1.
Copy file 41434445.EDC to a USB stick.
2.
Insert the USB stick in the USB A socket of the update cable.
3.
Turn on the device.
4.
Open the system settings:
5.
Select the option
ð
The firmware and system menu are updated.
(Accessories
Update via USB:
Firmware and system menu | 7
Language selection in the system
[} 39]).
21