Electrical Installation Rules; Water Installation Rules - LaCimbali M26 Use And Installation

3. Electrical Installation Rules

that allows for complete disconnection when there is a category III overload and that provides
power-supply in compliance with installation rules.
If the power-supply is not working properly, the appliance can cause transitory voltage drops.
Check that the type of connection and voltage correspond with the information on the nameplate: see illustrations chapter,
Figure 1.
in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.

4. Water Installation Rules

WATER REQUIREMENTS
Check on the machine's water inlet that the pH and chloride values comply with current law.
according to the hardness detected and machine usage.
WARNING
WATER CONNECTIONS
Hook up the water connections as shown in the Illustrations chapter, Figure 3, respecting the hygiene, water safety, and
anti-pollution laws in the country of installation.
Note
Illustrations chapter, Figure 4.
IMPORTANT
federal, state or local plumbing codes having jurisdiction.
illustrations chapter, Figure 2.
5 EN
Illustrations chapter, Figure 5.