Download Print this page

Installation Of The Unit - Travis Industries LOPI X Owner's Manual

Advertisement

Your LOPI fireplace insert will came packaged in several boxes.
These will include:
1.
STOVE MASTER BOX
handles, firebrick, baffle, hardware kit, manual, and ashlip.
G L A S S B O X -
2.
and non-asbestaes fiberglass garketing.
3.
PANEL
Brass Trim and Hardware.
Accessories available through your local LOPI dealer.
f i r e - p a r t s . c o m
optional packages include:
1.
Reduced clearance mantle shield
2.
Etched glass.
WARNING:
HAZARDS.

INSTALLATION OF THE UNIT.

Your fireplace insert is very heavy and requires at least twa
people to move it safely.
mishandling.
chimney system thoroughly.
seek professional advice from your authorized LOPI dealer or
certified chimney sweep.
DEALERS ARE
HIGHLY RECOMMENDED.
WARNING:
TO INSTALL UNIT.
BETWEEN THE MASONRY OF THE FIREPLACE AND THE MASONRY
NOTE:
AND USE ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
-
Includes one piece of glass far the single door
BOX
-
Includes two side panels, one tap panel with
CARELESS
INSTALLATION IS THE MAJOR CAUSE OF SAFETY
CHECK ALL
LOCAL BUILDING
Before installing, check and clean your masonry
TRAINED TO SAFELY INSTALL UNITS AND IT IS A CHOICE WE
DO NOT REMOVE
IT IS NECESSARY TO PERMANENTLY SEAL ANY OPENING
D O NOT INSTALL IN A ZERO CLEARANCE FIREPLACE!!
Includes the stave firebax.
AND
SAFETY
The insert can be damaged by
If in doubt about it's condition,
PRICK OR MORTAR FROM EXISTING FIREPLACE
L
.
Door with
These
CODES BEFORE
FACING.
INSTALL
l
.

Advertisement

loading