Subscribe to Our Youtube Channel
Related Manuals for Crosley Furniture CF1325
Summary of Contents for Crosley Furniture CF1325
- Page 2 Partition Panel Back Rail Upper Fixed Lower Fixed Back Slat Shelf Panel Shelf Panel...
- Page 3 Screw Short Screw...
- Page 4 Please do not use tools to assemble this unit unless specifically indicated. Step 1. Insert drawer left panel (part I) and drawer right panel (part J) into drawer front panel (part H) pull down to lock. Slide drawer bottom panel (part L) into grooves of assembled unit (parts H, I &...
- Page 5 Step 2. Insert lower fixed shelf panel (part N) to partition panel (part F). Step 3. Attach upper fixed shelf panel (part M) to partition panel (part F) using wood dowels (part #7), screws (part #3) and phillips head screwdriver.
- Page 6 Step 4. Attach panels (parts B & C) and back rail (part G) to panels (parts F, M & N) using wood dowels (part #7) and lock the hardware. Step 5. Attach bottom panel (part D) to assembled unit (parts B, C, F & G) using wood dowels (part #7), screws (part #3) and phillips head screwdriver.
- Page 7 Step 6. Attach legs (parts P & Q) to bottom panel (part D) using bolts (parts #5 & #6) and allen wrench (part #9). Step 7. Carefully turn unit upright. Attach back slat (part O) to back rail (part G) using wood dowels (part #7).
- Page 8 Step 8. Insert back panels (part E) into grooves of assembled unit (parts B, C, G & O). Step 9. Attach top panel (part A) to assembled unit (parts B, C & O) using wood dowels (part #7) and lock the hardware.
- Page 9 Step 10. Slide assembled drawer into place. Note: To release trigger disconnect levers push one side up and the other down. Trigger Disconnect Lever Slide Track Trigger Disconnect Lever Slide Runner Note: It is important to adjust levelers once fully assembled and upright. Extend adjustable leveler until it's firmly in contact with the floor.
- Page 10 Step 11. Secure back brackets (part #10) at the corner of back panels (part E) using short screws (part #1) and phillips head screwdriver. Important: Safety strap kit (part #11) must be installed to prevent tipping, damage and /or injury.
- Page 11 D8*3/4" D8*1-1/2" Wall Anchor Washer Short Screw Long Screw Safety Wall Strap...
Need help?
Do you have a question about the CF1325 and is the answer not in the manual?
Questions and answers