Subscribe to Our Youtube Channel
Related Manuals for Crosley Furniture CF100160
Summary of Contents for Crosley Furniture CF100160
- Page 2 Left Vertical Panel Right Vertical Panel Fixed Shelf Front Top Rail Left Panel 1 PC 1 PC 1 PC 1 PC 1 PC Right Panel Back Rail Back Panel Middle Back Panel Back Vertical Rail 1 PC 2 PCS 2 PCS 1 PC 2 PCS Bottom Panel...
- Page 3 (Spare Part)
- Page 4 Insert cam bolts (part #2) into bottom panel (part K), top panel (part L) and panels (parts A, B, Step 1. E & F) using phillips head screwdriver. NOTE: Do not overtighten cam bolts. Stop tightening once threads on cam bolt are no longer visible.
- Page 5 Carefully turn unit upright. Attach front top rail (part D) to panels (part A & B) using wood dowels Step 3. (part #3), screws (part #4) and phillips head screwdriver. Step 4. Carefully turn unit upside down on a soft flat surface, such as carpet, as shown below. Attach left panel (part E) to front top rail (part D) using cam lock (part #1) and wood dowel (part #3).
- Page 6 Step 5. Attach back rail (part G) to left panel (part E) using cam lock (part #1) and wood dowel (part #3). NOTE: point arrow on cam lock toward adjacent hole 1/2 tum clockwise to fasten Step 6. Attach back vertical rails (part J) to back rail (part G) using wood dowels (part #3). Slide back panels (part H) and middle back panel (part I) into grooves of back rail (part G) and back vertical rails (part J).
- Page 7 Step 7. Attach right panel (part F) to assembled unit (parts D, G & H) using cam locks (part #1) and wood dowels (part #3). Attach magnets (part #10) and double magnet (part #11) to fixed shelf (part C) and front top rail (part D) using round head screws (part #12) and phillips head screwdriver. NOTE point arrow on cam lock toward...
- Page 8 Step 8. Attach bottom panel (part K) to assembled unit (parts A, B, E, F & G) using cam lock (part #1), wood dowels (part #3), hex socket head bolts (part #5), barrel nuts (part #6) and allen wrench (part #13).
- Page 9 Attach support rail (part U) to top panel (part L) using wood dowels (part #3), screws (part #4) and Step 9. phillips head screwdriver. Step 10. Carefully turn unit upright. Attach top panel (part L) to assembled unit (parts A, B, D, E, F & G) using cam locks (part #1), wood dowels (part #3), screw (part #4) and phillips head screwdriver.
- Page 10 Attach knobs (part #8) to door panels (parts M, N, O & P) using round head bolts (part #9) and Step 11. phillips head screwdriver. Attach door panels (parts M, N, O & P) by placing bottom pin hinge (pre-installed in door) in the pre-drilled holes of bottom panel (part K). Then depress the top spring-loaded pin hinge so it can be placed in the pre-drilled holes of fixed shelf (part C) and top panel (part L).
- Page 11 Step 12. Place shelf holders (part #7) into desired position and then slide adjustable shelves (part Q) and middle adjustable shelf (part R) into place.
- Page 12 Carefully lay unit down. Attach long support leg (part S) or short support leg (part T) to bottom Step 13. panel (part K) by turning clockwise into the center pre-drilled hole. Short support leg (part T) should only be used with Bun Feet. All other leg styles will use long support leg (part S). Step 14.
- Page 13 D8*3/4" D8*1-1/2 Washer Short Screw Long Screw Safety Wall Strap 1 SET 1 PC 1 PC 1 PC 1 PC Note: Wall...
Need help?
Do you have a question about the CF100160 and is the answer not in the manual?
Questions and answers