Subscribe to Our Youtube Channel
Related Manuals for Crosley Furniture CF100160
Summary of Contents for Crosley Furniture CF100160
- Page 2 Left Vertlcal Panel Right Vertlcal Panel Shelf Panel Front Rail Left Side Panel 1 PC 1 PC 1 PC 1 PC 1 PC Right Side Panel Back Rail Back Panel Back Panel Back Left Post 1 PC 2 PCS 2 PCS 1 PC 2 PCS Bottom Panel...
- Page 3 ADDITIONAL TOOLS(Not Provided) Note:lt is not recommended to use power tools during assembly .However a screw gun can assist with mounting Phillips Head Screw Driver...
- Page 4 Insert Cam Bolts (part #2) into pre-drilled holes of parts A,B,E,F,K, & L using Step 1. a Phillips head screw driver. Note:Do not overtighten cam bolts. Stop tightening once threads on cam bolt are no longer visible. A&B E&F Step 2. Attach panels A &...
- Page 5 Turn assemble parts A,B & C upright with notched cutouts facing upward. Attach Step 3. Rail D using Wood Screws (part #4) & Wood dowels as shown. Step 4. Turn unit over with Rail D flat on floor as shown. Attach Panel E to Rail D using Cam lock &...
- Page 6 Step 5. Attach Rail G to the unit using Cam lock & Wood dowel as shown. Step 6. Place Rails J into place on Rail G using Wood dowels as shown .Slide Back panels H & Panel l into the grooves as shown. lnsert Wood dowels into the top end of Parts J.
- Page 7 Step 7. Attach Side Panel F using Wood dowels & Cam locks as shown. Attach Magnet (part #11) to Shelf C using Round Head screws (Part#12) as shown. Attach Door Catch Magnet (Part#10) to Rail D using Round Head Screws (Part #12) as shown.
- Page 8 Step 8. With bottom side facing up, attach Base K to cabinet using Wood Dowels, Hex Socket Head Bolt (Part #5) & Barrel Nuts (Part #6) as shown. Attach legs using Hex Socket Head Bolts & Wood dowels (as shown in instruction manual included in carton with legs).
- Page 9 Step 9. Attach Rail U to Top L using Wood Dowels & Screws as shown. Step 10. Attach Top L to cabinet using Wood Dowels & Cam Locks as shown. Secure Rail D to Top L using one Wood Screw (Part #4) through pre-drilled hole as shown.
- Page 10 Attach hardware knobs (Part #8) to Doors M,N,O&P using Round Head Bolts (Part Step 11. #9) and a Phillips Head screw driver. Attach doors to cabinet by placing bottom Pin Hinge into pre-drilled holes at the bottom & depressing top spring loaded Pin Hinge to fit door into place.
- Page 11 Step 12. lnsert the Shelf Holders (Part #7) into desired position and add shelves.
- Page 12 Place your assembled cabinet into the desired spot in your home. Attach the Step 13. Center Support Leg S or T now by turning clockwise into the pre-drilled hole. Support Leg T is for use only with Bun Foot. All other Leg styles will use support leg S.NOTE:The adjustable leveler on the bottom of the Center Support Leg S/T should not be extended until after installation.
- Page 13 Step 14. D8*3/4" D8*1-1/2 WALL ANCHOR WASHER SHORT SCREW LONG SCREW SAFETY WALL STRAP AX1 PC CX1 PC DX1 PC EX1 PC 1 SET Wall...
Need help?
Do you have a question about the CF100160 and is the answer not in the manual?
Questions and answers