Troubleshooting - Philips SA178 User Manual

Troubleshooting

If a fault occurs, first check the points listed in the following pages. For further help and other
troubleshooting tips, please also check out FAQs at www.philips.com/support.
If you are unable to find a solution by following these hints, consult your dealer or service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate
the warranty.
Symptom
Hang up
Cannot power up
Device shows "Memory Full"
Solution
Press the reset button
Connect your device to your computer and charge until the
battery indicator stops blinking.
2;
Press and power up the device.
In case of device error, connect your device to the
computer. Use Firmware Manager to restore your device.
Connect your device to the computer. Delete unwanted files.
Unplug safely. Record again.
13