3. OPERATION
UK
● Never use petrol, alcohol or solvents to clean the appliance.
● Never spray insecticide liquids or similar.
Cleaning the air filters
To keep your appliance working efficiently, you should clean the filter every month ofoperation.
The evaporator filter can take out like fig.
2
1
● To avoid possible cuts, avoid contacting the metal parts of the appliance when removing or re-
installing the filter. It can result in the risk of personal injury.
Use a vacuum cleaner to remove dust accumulations from the filter. If it is very dirty, immerse in
warm water and rinse a number of times. The water should never be hotter than 40℃(104℉). After
washing, leave the filter to dry then attach the intake grille to the appliance.
3.13 END OF SEASON OPERATIONS
To empty the internal circuit completely of water, remove the cap(fig. below).
Run off all water left into a basin. When all the water has been drained, put the cap back in place.
Clean the filter and dry thoroughly before putting back.
IGLU-23
34