Self-Diagnosis - Haverland IGLU 2023 Installation Manual

3. OPERATION
UK
* Programming shut down
- When the appliance is running, press the "
- Press the " "/ " " to adjust the set time from 0.5-24 hours.
- In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
- Press the " " " button again to cancel the Timer, and the " Timer " symbol disappear.
* Switch the unit of temperature
When the appliance is running, hold on "
time, then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like fi g 1 (ºC).
After change, in cool mode, the screen display like fi g 2 (ºF).

3.6 SELF-DIAGNOSIS

The appliance has a self diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
IF IS DISPLAYED
PROBE FAILURE (sensor damaged)
FULL TANK (safety tank full)
IGLU-23
30
", l button, the screen starts to fl ash.
" and " " " button together 3 seconds by the same
WHAT SHOULD I DO?
If this is displayed, contact your local authorize
service centre.
Empty the internal safety tank, following the
instructions in the "End of season operations"
paragraph.