Jabra ENHANCE SELECT 200 Rx User Manual page 23

Using the push button
Changing programs
•
Push the button to switch from one program to the next.Push the button for 1-2 seconds to switch from one
program to the next. Your hearing aids will beep to confirm the change. The number of beeps indicates which
program you have selected.
•
To get back to the default listening program, keep scrolling, or turn your hearing aids off and on again.
NOTE: If you have two hearing aids with synchronization enabled, changing the program on one hearing
aid automatically applies the change to the second hearing aid as well.
Streaming sound to your hearing aids
Press the button and keep it pressed for three seconds. Your
hearing aids will start streaming from the audio device you
have chosen.
Before you can stream to your hearing aids, you must pair
them with your audio device. For more information on how to
do this, consult the user instructions for your audio device.
Using your hearing aids 23