Load Distribution On The Agila Equipment Pole - Dräger Agila Instructions For Use Manual

Load distribution on the Agila equipment pole

Example of version with 2 double arms
1
2
B
3
C
Requirements for the support arms
– 1 support arm must be positioned in the upper
area (1)
– 1 support arm must be positioned in the central
area (2)
– Maximum load (A): 7.5 kg (16.5 lb)
– Maximum length (B): 800 mm (31.5 in)
Requirements for the equipment pole
– Payload (C): 30 kg (66.1 lb)
Instructions for use Agila
A
A
This page has been left blank intentionally.
Example of version with 2 single arms
1
2
B
3
C
Requirements for the support arms
– 1 support arm must be positioned in the upper
area (1)
– 1 support arm must be positioned in the central
area (2)
– Maximum load (A): 15 kg (33.1 lb)
– Maximum length (B): 400 mm (15.6 in)
Requirements for the equipment pole
– Payload (C): 15 kg (33.1 lb)
A
A
59