Subscribe to Our Youtube Channel
Related Manuals for Vax GRAB & GO VHV22I2
Summary of Contents for Vax GRAB & GO VHV22I2
- Page 1 GRAB & GO HANDHELD VACUUM FOR ON-THE-GO CLEANING USER GUIDE LET’S GET STARTED. VHV22I2...
-
Page 2: Let's Talk Safety
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. READ ALL THE INSTRUCTIONS BEFORE USING THIS APPLIANCE. • This appliance is battery-operated, and the battery is charged whilst inside the Basic appliance. - Page 3 • For dry vacuum only. DO NOT vacuum any liquids. • Only VAX recommended tools and accessories should be used with this vacuum cleaner. • In between uses, lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.
- Page 4 Thank you for purchasing the VAX Grab & Go Taking care of small cleaning tasks The Grab & Go is designed to make cleaning as quick and convenient as possible and this user guide will help you get the most out of your machine. The Grab & Go is perfect for small cleaning tasks on surfaces and upholstery.
-
Page 5: Table Of Contents
Contents Let’s talk safety Included with your machine Getting to know your machine Crevice Tool Getting started Brush Tool Using your machine Taking care of your machine Charger What to do if it goes wrong Charging Dock Also includes warranty sheet and a user guide. Contents may vary. -
Page 6: Getting To Know Your Machine
Charger Crevice tool Brush tool Charging dock Charger Specifications Filter Spare Part Technical Specifications Name: Vax Grab & Go Handheld Vacuum Charger Model No.: SAW06C-090-0500AD Filter Part Number: 029556001006 Model No: VHV22I2 Charger Input: 100-240V~50/60Hz 0.3A Voltage: 7.4V Li-Ion Charger Output: 9V... -
Page 7: Getting Started
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the attachments or removing and emptying the dust container. IMPORTANT: For best cleaning results, empty the dust container after each use. The filter should be tapped over a bin every 4-6 uses, to remove dirt and debris, and replaced every 6-9 months, depending upon use. -
Page 8: Using Your Machine
Using your machine Charging WARNING: Do not attempt to use the vacuum cleaner when the machine is plugged in and charging. WARNING: For best performance the charging port must be clean and free from dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner. - Page 9 Using your machine Using your vacuum cleaner IMPORTANT: During operation, move the vacuum back and forth over a surface. Use even strokes and allow the vacuum to pick up the debris. For best performance, it is advisable to empty the dust container after each use. CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the accessories or removing and emptying the dust container.
-
Page 10: Taking Care Of Your Machine
Taking care of your machine Filter removal and replacement IMPORTANT: The filter should be tapped over a bin every 4-6 uses, to remove dirt and debris, and replaced every 6-9 months, depending upon use. The filter should be washed every 3 months, or when required. Allow the filter to completely dry before reinstalling. -
Page 11: What To Do If It Goes Wrong
What to do if it goes wrong Problem Solution • Battery not charged – Charge battery up to 4 hours. The indicator light will pulse until the battery is fully charged and show a solid blue light. • Battery might be too hot, allow the vacuum to cool for 1 hour. Cleaner won’t run •... - Page 12 Distributed By Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149, Melbourne, Australia Careline AU: 1300 VAX AUS (1300 829 287) www.vax.com.au Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, East Tamaki, Auckland, 2013, New Zealand...
Need help?
Do you have a question about the GRAB & GO VHV22I2 and is the answer not in the manual?
Questions and answers