Run Current; Hold Current; Micro Step; Device Info - Zaber T-CON3 User Manual

5.5.8 Run Current

This command sets the running current on T-CD series chopper drivers. This command is not
valid for all T-series products. Please see the user's manual for T-CD series chopper driver for
more detail on how to set the running current.

5.5.9 Hold Current

This command sets the hold current on T-CD series chopper drivers. This command is not valid
for all T-series products. Please see the user's manual for T-CD series chopper driver for more
detail on how to set the hold current.

5.5.10 Micro Step

This command sets the number of microsteps per step for the motor. This command is not valid
for all T-series products. Please see the user's manual for more detail on the micro step function.

5.6 Device Info

Device Info is a sub-menu that allows the user to retrieve information about the selected device.

1-Device ID

2-Version
3-Voltage
When in the Device Info sub-menu, pressing the "Back" key returns to the previous Actuator
Menu, and pressing the rotary knob escapes back to the main control screen.
5.6.1 Device ID
The Device ID command retrieves the ID of the currently selected actuator.
Device ID:
Pressing the "Back" key returns to the previous Device Info menu, and pressing the rotary knob
escapes back to the main control screen.
Copyright © Zaber Technologies Inc.
Back
28
Back
Page 19 of 22