Table of Contents
Advertisement
3.1 Main Menu
The Main Menu enables the user to change global parameters affecting the controller (like LCD
Settings), or issue commands that are not specific to a particular actuator (like Initialize). Access
the Main Menu from the control screen by selecting the bottom line, and pressing the rotary
knob. The following Main Menu will be displayed:
1-User Step
2-Initialize
3-LCD Settings
...
When in any menu, the left hand side displays a number next to the function. The number is
simply the order that the functions show up on the menu. The three dots on the bottom left-hand
corner of the screen ("...") indicate that there are more functions on the menu. Scroll the menu
up and down by turning the rotary knob:
4-Measurement
5-Reset
6-About
Select any function by pressing the button next to the line with the clear arrow. At the bottom
right hand corner there is a "Back" button that allows the user to back up to the previous level of
menu, or back out to the main control screen. Pressing the rotary knob at any level of the menu
jumps all the way back to the main control screen.
Copyright © Zaber Technologies Inc.
Back
Back
Page 9 of 22
Advertisement
Table of Contents
