Table of Contents
Advertisement
Section IV - Operating Procedures
•
Here, under "operation mode", there are three options. They are Local, Remote and LAN control. If only one
compressor is needed to run in a different way than the others connected in a network then Local control should be
chosen as the operation mode for that respective compressor. If "LAN control" is chosen then all the slave com-
pressors will follow the master settings. For "Remote control" it's similar to LAN control but to activate Remote
start/stop, we need to run the compressors at Remote control.
•
Remote start/stop under "General" section can only be selected if that option was chosen before installing the
software in the Q-Control and needs the machine to be running in the Remote control mode. The last option is
''Critical Application" and this one is not going to be used on our standard products.
•
Next item is "Action Scheme"
window appears:
66
. Using scroll keys select action scheme and press the Enter key. Following
Quincy Compressor-QSI
®
Hide quick links:
Advertisement
Table of Contents
