Grundfos Go - Grundfos CRE Instructions Manual

6.6 Grundfos GO

The pump is designed for wireless radio or infrared communication
with Grundfos GO.
Grundfos GO enables setting of functions and gives access to
status overviews, technical product information and actual operating
parameters.
Grundfos GO offers the following mobile interfaces (MI).
Grundfos GO communicating with the pump via radio or infrared
connection (IR)
Pos. Description
Grundfos MI 301:
Separate module enabling radio or infrared
1
communication. You can use the module in conjunction
with an Android or iOS-based smart device with
Bluetooth connection.
6.6.1 Communication
When Grundfos GO Remote communicates with the pump, the
indicator light in the middle of the Grundfos Eye will flash green.
Communication must be established using one of these
communication types:
• radio communication
• infrared communication.
Radio communication
Radio communication can take place at distances up to 30 meters.
It is necessary to enable communication by pressing
the pump control panel.
Infrared communication
When communicating via infrared light, Grundfos GO Remote must
be pointed at the pump control panel.
6.6.2 Navigation
Navigation can be done from the dashboard. See the figure below.
1
+
or on
Dashboard
1
2
3
5
7
9
10
13
15 16
Example of dashboard
Pos. Description Action
This text appears when Grundfos GO
Remote app has connected to an MI
201, MI 202 or MI 301.
Connection
1
indicator
If the hardware is not connected, it will
not be possible to communicate with a
Grundfos product.
2 Back button Returns to the previous display.
Product Provides technical information about
3
information the product.
Name of the product communicating
4 Product name
with Grundfos GO Remote.
Alarms and
5 Shows alarms and warnings.
warnings
Shows the operating condition of the
6 Grundfos Eye
product.
Primary status
7 Shows the primary status value.
value
Secondary status
8 Shows the secondary status value.
value
Shows by which interface the product
9 Control source
is controlled.
Shows the control mode of the
10 Control mode
product.
Actual setpoint
11 Shows the actual setpoint value.
value
12 Operating mode Shows the operating mode.
13 Show menu Gives access to other menus.
14 Stop Stops the product.
Tool bar
The help function describes the menus
15 Help making it easy for the user to change
settings, etc.
Gives access to installation and
16 Documentation operating instructions and quick
guides.
Enables the creation of user-defined
17 Report
reports.
Enables update of Grundfos GO
18 Update
Remote app.
4
6
8
11
12
14
17 18
31