Toyota HILUX 2008 Owner's Manual page 222

10. Lower the vehicle completely and
tighten the wheel nuts.
Turn the jack handle end with the exten-
sions counterclockwise to lower the ve-
hicle, making sure the handle remains
firmly fitted onto the jack handle exten-
sion.
Use only the wheel nut wrench and turn
it clockwise to tighten the nuts. Do not
use other tools or any additional leverage
other than your hands, such as a hammer,
pipe or your foot. Make sure the wrench
is securely engaged over the nut.
Tighten each nut a little at a time in the
order shown. Repeat the process until all
the nuts are tight.
CAUTION
When lowering the vehicle, make
D
sure all portions of your body and
all other persons around will not be
injured as the vehicle is lowered to
the ground.
Two−wheel drive models: Have the
D
wheel nuts tightened by torque
wrench to 121 N·m (12.3 kgf·m, 89
ft·lbf) for aluminum wheel and 152
N·m (15.5 kgf·m, 112 ft·lbf) for steel
wheel, as soon as possible after
changing wheels. Otherwise, the
nuts may loosen and the wheels
may fall off, which could cause se-
rious accident.
Four−wheel drive models: Have the
D
wheel nuts tightened by torque
wrench to 105 N·m (10.7 kgf·m, 77.4
ft·lbf), as soon as possible after
changing wheels. Otherwise, the
nuts may loosen and the wheels
may fall off, which could cause se-
rious accident.
—Reinstalling wheel
ornament
40h031
Type A
40h032
Type B
211