Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Reliance 68 Series
Summary of Contents for Reliance 68 Series
- Page 1 INSTRUCTIONS FOR USE 68XXXX Series Anchorage Slings Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries Phone : 281-930-8000 P.O. Box 2046 Toll Free : 888-362-282-6281 Deer Park, TX 77536 Fax : 281-930-8666...
-
Page 2: Table Of Contents
Contents DESCRIPTION WEB ANCHOR APPLICATIONS AND SELECTION A. USE LIMITATIONS ................4 - 6 1) CAPACITY .................... 4 2) FREE FALL ................... 4 3) FALL CLEARANCE ................5 4) SWING PENDULUM FALLS ............... 5 5) CHEMICAL HAZARDS ................5 6) HEAT ..................... 5 7) CORROSION .................. - Page 3 IMPORTANT: Alterations or misuse of this product or failure to follow instructions may result in serious injury or death. If you have ques- tions on the use, care, or suitability of this equipment for your application, contact RELIANCE Industries, LLC for information. Page 3...
-
Page 4: Description
DESCRIPTION Unless otherwise noted all Reliance anchor slings are manufactured using certified 7500 pound rated polyester webbing for superior inspectability and chemical and acidic tolerance. 1 - Large D-Ring 3 - Wear Strap 6 - Anchor Strap 5 - D-Ring... -
Page 5: Fall Clearance
Instructions for Use that free fall is limited to 18 inches or less. Rescue systems must be rigged so that no vertical free fall is possible. See subsystem manufacturer’s instructions for more information. 3) FALL CLEARANCE: There must be sufficient clearance below the user to arrest a fall before the user strikes the ground or other obstruction. -
Page 6: Corrosion
A. COMPATIBILITY OF SYSTEM PARTS 1) COMPATIBILITY OF COMPONENTS AND SUBSYSTEMS: RELIANCE products are designed to be used with RELIANCE approved components and connecting subsystems. Use of this product with products made by others that are not approved in writing... -
Page 7: Compatibility Of Connectors
Instructions for Use application (e.g. fall arrest or restraint). RELIANCE produces a line of connecting subsystems for most applications. Contact RELIANCE for further information. Refer to the manufacturer’s instructions supplied with the component or connecting subsystem to determine suitability. For fall arrest applications using the anchor sling, the maximum fall arrest force must not exceed 1,800 lbs. -
Page 8: Using The Anchor Sling
USING THE WEB CHOKER ANCHORAGE SLING A. INSPECT PRIOR TO USE: Before the use of this product, inspect it and all components of the PFAS: 1) Inspect the anchor strap to verify that it is in serviceable condition. Examine every inch of the straps for severe wear, cuts, burns, frayed edges, abrasion, or other damage. -
Page 9: Plan Scope Of Work To Be Performed Analysis)
Instructions for Use Figure 2. C. PLAN SCOPE OF WORK TO BE PERFORMED (JOB SAFETY TASK ANALYSIS): Plan procedures to safely perform tasks when using any components of a PFAS. Some considerations are listed below (see APPLICATIONS, item B. USE LIMITATIONS section for additional details);... -
Page 10: Care Of The Anchor Sling
More information on cleaning is available from RELIANCE. If you have questions concerning the condition of your anchor sling, or have any doubt about putting it into service contact RELIANCE. -
Page 11: Labeling
Reliance Anchor Slings. . The Anchor Strap Specifications Label contains information that is spe- cific to the particular anchor sling. It will identify the RELIANCE part num- ber, the size of the sling, the material of which it is constructed, the date the sling was manufactured, and the sling’s unique serial number. - Page 12 barcodes are intended to facilitate the issuance, inspection and logging procedures for those users equipped to utilize bar codes. All the information on the Anchor Strap Specifications Label is important for the safe use of this product, so the user should ensure that the label has not been removed and that the descriptions it contains match the task and environment in which the product is intended to be used.
-
Page 13: Inspection Record
Instructions for Use SPECIFICATIONS EQUIPMENT RECORD 68XXXX SERIES WEB PART NUMBER CHOKER ANCHORAGE SLINGS SERIAL NUMBER DATE Certified to meet the current MANUFACTURED ANSI Z359.1(2007) and OSHA PURCHASE DATE regulations for the anchorage device component of a complete ASSIGNED TO personal fall arrest system. - Page 14 NOTES Page 14...
- Page 15 Instructions for Use NOTES Page 15...
- Page 16 Reliance Industries P.O. Box 2046 Deer Park, TX 77536 Phone : 281-930-8000 Toll Free : 888-362-282-6281 Fax : 281-930-8666 www.relsafe.com Copyright 2010 Reliance Fall Protection T353003 Rev D...
Need help?
Do you have a question about the 68 Series and is the answer not in the manual?
Questions and answers