Table of Contents
Related Manuals for Robot Coupe A Series
Summary of Contents for Robot Coupe A Series
- Page 1 • R 401 Series A • R 402 Series A • R 402 V. Series A Robot Coupe U.S.A., Inc. 264 South Perkins, Ridgeland, MS 39157 Phone : 800/824-1646 • 601/898-8411 email: info@robotcoupeusa.com - website: www.robot-coupe.com 30/10/2020...
- Page 2 •This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and...
- Page 3 www.robotcoupeusa.com Register your product online We reserve the right to alter at any time without notice the technical specifications of this appliance. None of the information contained in this document is of a contractual nature. Modifications may be made at any time. ©...
-
Page 4: Table Of Contents
CONTENTS WARRANTY OPTIONS • Coarse serrated blade • Fine serrated blade IMPORTANT WARNING CLEANING INTRODUCTION TO YOUR NEW • Motor base R 401 Series A • Attachments R 402 • R 402 V. Series A MAINTENANCE CUTTER BOWL • Motor seal VEGETABLE PREPARATION ATTACHMENT •... - Page 5 ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY THE FOLLOWING ARE NOT COVERED Commercial equipment use is defined as but not limited to the preparation of food substance within the confines YOUR NEW ROBOT COUPE COMMERCIAL UNDER WARRANTY: of a restaurant/facility, that is sold and consumed within PRODUCT IS WARRANTED TO THE said restaurant/facility.
-
Page 6: Important Warning
•This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and... -
Page 7: Introduction To Your New
INTRODUCTION TO YOUR NEW SWITCHING ON THE MACHINE ASSEMBLY R 401 Series A • ADVICE ON ELECTRICAL CONNECTIONS • CUTTER BOWL ATTACHMENT R 402 • R 402 V. Series A 1) With the motor base Before plugging in, check that your power supply CUTTER BOWL / VEGETABLE facing you, place the bowl corresponds to that indicated on the machine’s... -
Page 8: Vegetable Preparation Attachment
• VEGETABLE PREPARATION ATTACHMENT 4) Place the cutting plate Next fit the appropriate slicing disc and screw the of your choice onto the 1) The vegetable prepara- slicer on the motor shaft with discharge plate. It may tion attachment consists of the butterfly nut. -
Page 9: Operation
For the R 401 Series A - R 402 Series A - The cutter bowl attachment has numerous other Max processing Processing applications. The above quantities and times are R 402 V Series A models: USES quantity time approximate and may vary according to the quality 5) Place the continuous feed lead onto the (in lb) (in mn) -
Page 10: Options
- Hold the pusher in one hand, and press the On water, then with a sanitizing solution. Dry the OPTIONS button with the other. machine with a soft cloth removing all liquids from seal areas. - Apply steady but moderate pressure with the A coarse serrated blade pusher until the pusher stops. -
Page 11: Maintenance
• DIMENSIONS (in inches) When you open the lever of the vegetable MAINTENANCE preparation attachment, the motor stops. When you close the lever, the machine restarts. • MOTOR SEAL To avoid splashing when running liquids in the An examination should be made periodically to bowl, allow the blades to come to a complete stop assure that a seal against liquids is being before opening the lid. -
Page 12: Service
SERVICE See warranty first then; Should your unit require service, check with your distributor to see where local service is available. If not or if you wish your unit to be serviced at the factory, call for return instructions and ship the unit prepaid to our factory address. PH : 1-800-824-1646 Robot-Coupe USA, Inc Service Department Repair... - Page 13 WIRING DIAGRAM 30/10/2020...
- Page 14 30/10/2020...
- Page 15 30/10/2020...
- Page 16 30/10/2020...
- Page 17 30/10/2020...
- Page 18 Robot Coupe U.S.A., Inc., Phone: 800/824-1646 • 601/898-8411 264 South Perkins St., Ridgeland, MS 39157 e-mail: info@robotcoupeusa.com website: www.robot-coupe.com...