Page 1
Blixer® 5 V.V. Series A Blixer® 6 V.V. Series A Robot Coupe U.S.A., Inc. 264 South Perkins St., Ridgeland, MS 39157 Phone : 800/824-1646 • 601/898-8411 • Fax: 601/898-9134 e-mail: info@robotcoupeusa.com • website: www.robotcoupeusa.com 20/11/2017...
Page 2
Otherwise, the motor can overheat. a location not subject to water drips or spray or • Robot Coupe can in no way be held responsible explosive vapors. for the user’s failure to follow the basic rules of CONNECTION •...
Page 3
www.robotcoupeusa.com OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIÓN Register your Registre su Enregistrez votre product online producto en línea produit en ligne NOTICE D’INSTRUCTIONS We reserve the right to alter at any time without notice the technical specifications of this appliance. None of the information contained in this document is of a contractual nature. Modifications may be made at any time.
SUMMARY WARRANTY MAINTENANCE • Blade IMPORTANT WARNING • Motor shaft seal INTRODUCTION TO YOUR NEW • Wiper assembly EMULSIFIER-MIXER Blixer 5 V.V. Series A • Blixer 6 V.V. Series A ® ® TECHNICAL SPECIFICATIONS SWITCHING ON THE MACHINE • Weight •...
Page 6
BEFORE or accessories. Neither ROBOT COUPE U.S.A., Inc. nor its WARRANTY REPAIRS ARE BEGUN. affiliated companies or any of its distributors, Replacement parts and accessories are...
• Robot Coupe can in no way be held responsible Otherwise, the motor can overheat. explosive vapors. for the user’s failure to follow the basic rules of •...
With the bowl and blade secured in place (per For most of the foods, it is advisable to start with OPERATION previous instructions), you are now ready to add a few number of «pulses» with speed set in the product to the bowl. Medium range (900 - 1,500 rpm).
2. TO PUREE OR FINE CHOP: For a fine puree, Low speed. Begin adding 2 qt. of oil pouring A FEW EXAMPLES OF MAXIMUM QUANTITIES: emulsification, or fine chop, fill the bowl not very slowly through the lid hole allowing the Maximum Quantity more than to ¾...
• MOTOR BASE 4. Turn the Locking Nut clockwise (4a) to tighten Ensure power supply to machine is disconnected. Never immerse the motor base in water. Clean or counterclockwise (4b) to loosen. The bottom Blixer 5 V.V. Series A: There ®...
• MOTOR SHAFT SEAL TECHNICAL SPECIFICATIONS An examination should be made periodically to assure that a seal against liquids is being maintained around the motor shaft. • WEIGHT (Lbs) Gross With proper care and depending on use, the seal should last for a year or more. ®...
PH : 1-800-824-1646 Robot Coupe USA, Inc Service Department Repair 264 South Perkins Street Ridgeland, MS 39157 For service in Canada contact the Robot Coupe USA factory for repair instructions. 20/11/2017...
Page 15
TECHNICAL DATA DATOS TÉCNICOS DONNÉES TECHNIQUES 20/11/2017...
Need help?
Do you have a question about the A Series and is the answer not in the manual?
Questions and answers