Declaration Of Conformity - SKF SYSTEM 24 LAGD 60 Instructions For Use Manual

UK Declaration of Conformity
SKF SYSTEM 24 LAGD 60 / LAGD 125
We, SKF MPT, Meidoornkade 14, 3992 AE Houten, The Netherlands herewith
declare under our sole responsibility that the products described in these
instructions for use, are in accordance with the conditions of the following
Directive(s):
The Equipment and Protective Systems Intended for Use in Potentially Explosive
Atmospheres Regulations 2016 (2016 No. 1107) and are in conformity with the
following standards:
EN IEC 60079-0: 2018, EN 60079-11: 2012, EN 50303: 2000
EN IEC 63000:2018: Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous substances
II 1 G Ex ia IIC T6 Ga
II 1 D Ex ia IIIC T
I M1 Ex ia I Ma
EU-Type Approval:
EU-Type Examination Certificate DEKRA 21ATEX0015 X Issue Number: 0
Issue by DEKRA Certification B.V. (0344)
0537
IECEx Certificate of Conformity:
IECEx DEK 15.0066X
Where in X denotes: –20°C ≤ Ta ≤ + 60°C (LAGD 60/... and LAGD 125/...)
appropiate measures must be taken to prevent electric discharge
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 (2012 No. 3032)
The person authorised to compile the technical documentation
on behalf of the manufacturer is
SKF (U.K.) Limited, 2 Canada Close, Banbury, Oxfordshire, OX16 2RT, GBR.
Houten, The Netherlands, January 2023
Guillaume Dubois
Manager Quality and Compliance
SKF SYSTEM 24 - LAGD 60 / LAGD 125
85°C Da
200
5