Kärcher BDS 43/150 C Classic Original Instructions Manual

Kärcher BDS 43/150 C Classic Original Instructions Manual

Hide thumbs Also See for BDS 43/150 C Classic:

Advertisement

Quick Links

BDS 43/150 C Classic
English
3
中文
8
97632910
06/17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BDS 43/150 C Classic and is the answer not in the manual?

Questions and answers

Summary of Contents for Kärcher BDS 43/150 C Classic

  • Page 1 BDS 43/150 C Classic English 中文 97632910 06/17...
  • Page 3: Table Of Contents

    Please read and comply with Proper use these original instructions prior to the initial operation of your appliance and Use this appliance only as directed in these store them for later use or subsequent own- operating instructions. ers. – The appliance is used for cleaning of hard surfaces and carpets in the interior Contents of buildings.
  • Page 4: Install The Push Rod

    4 Switch ON / OFF Safety Devices 5 Cable hook Safety devices serve to protect the user 6 Unlocking button and must not be rendered in operational or 7 Handle their functions bypassed. 8 Lever for level adjustment 9 Fuse for brush drive Lock 10 Socket for accessories Prevents the appliance from being...
  • Page 5: Operation

    Turning on the Appliance ATTENTION Risk of damage to the floor covering. Do not operate the appliance on the spot.  Insert the mains plug into a socket.  Set handle to working height.  Hold the handle with both hands. ...
  • Page 6: Transport

    Fault Remedy Transport Insuffi- Replace contaminated pads CAUTION cient and wash them at a max. tem- Risk of personal injury or damage! Mind the cleaning perature of 60 °C. weight of the appliance during transport. result Replace worn disc brush / pad. ...
  • Page 7: Technical Specifications

    Accessories and Spare Parts Technical specifications Only use original accessories and spare Power connection parts, they ensure the safe and trouble-free Mains voltage 220-240 operation of the device. Frequency For information about accessories and Max. power intake 1500 spare parts, please visit www.kaerch- Type of protection IPX4 er.com.
  • Page 8 在您第一次使用您的设备前,请 安全说明 先阅读并遵守本操作说明书原 件,为日后使用或其他所有者使用方便请 请您在首次使用本设备前阅读并注意本操 妥善保管本说明书。 作说明书和安全手册 (料号: 5.956-659.0),然后按其操作。 目录 危险程度 环境保护 ..危险 合乎规定的使用 ..提示会导致人员重伤或死亡的直接威胁性 安全说明 ..危险。...
  • Page 9 设备元件 通电 – 各项电气连接数据参见技术参数和铭 牌。 – 必须由一名电气安装人员实施电气连接 并符合 IEC 60634 - 1 规定的要求。 危险 电击危险。 – 不要碾过电源线。 危险 存在受伤危险! – 从不要将电源线绕到身体或颈部。 – 不要让电源线接触到转动的刷子 / 转动 的软垫。 安置刷子 / 软垫  电源插头从插座上拔出。  拉动倾斜调整杆。  将把手旋转至前方,进入垂直位置。  松开倾斜调整杆。  设备向后倾斜。 抓手、盘刷 / 软垫驱动圆盘 刷子...
  • Page 10 操作说明 停止调试 警告  电源插头从插座上拔出。 受伤危险!需要练习操作设备。  拉动倾斜调整杆。 – 确保需要清洁的区域内没有障碍物。  将手柄设到垂直位置中。 – 检查地面特征是否适宜使用设备进行清  松开倾斜调整杆。 洁。  取下洗涤剂箱 (选择性配置)并清理未 – 一旦表面不平整或粗糙,则难以进行操 消耗的洗涤液。 作。  在电缆挂钩周围缠绕电源电缆。  用清水冲洗洗涤剂箱 (选择性配置) 。 调整手柄  将设备放到停放位置上。 警告  取下驱动圆盘 / 盘刷。 由于设备失控发生的事故风险。仅在发动  用湿抹布清洁外壳。 机静止时设置手柄。...
  • Page 11 故障 排除故障 产品规格 / 参数 清洁效果 更换脏软垫并在最高 60°C 的 通电 不够 温度下清洗。 电源电压 220-240 更换磨损的盘刷 / 软垫。 频率 用水冲洗脏盘刷 最大消耗功率 瓦 1500 检查刷子 / 软垫和洗涤液是否 适宜于应用情况。 防护等级 IPX4 设备振动 检查盘刷 / 软垫是否正确定 保护等级 严重 位。 插座:最大功率输出 瓦 检查软垫是否固定。 刷子 / 软垫 手柄定位较低...
  • Page 12 http://www.kaercher.com/dealersearch...

Table of Contents

Save PDF