Nonprogrammable Control, Clearing And Information Keys - HP RPN SCIENTIFIC WP 34S Owner's Manual

Name Keys to press

C
#

n

Nonprogrammable Control, Clearing and Information Keys

Besides the commands CLALL, CLPALL, GTO., LOAD, LOADP, PSTO, RESET, and
SAVE, the following keystrokes cannot be programmed under the conditions stated:
Key(s) pressed in modes

confirmation

In a browser
CAT, SHOW,

61

Else
61
The mode conditions specified here will be checked top down for this command at execution time:
If CAT or STOPW is open, it will be served as described there;
else if there is an open catalog, the current item will be selected;
else if alpha mode is set, it will be left;
else the programmable command ENTER will be executed or inserted.
This method holds for all commands listed here using this triangular symbolic.
WP 34S Owner's Manual
in modes

#
n
DECM

Remarks
In CONV Inverts the current conversion (see p. 139).
Answers the question Sure? with N for 'no'. Any other response
Asking for
except
Will be honored as described in the respective sections. See the
note below this list.
Will be honored as described in the respective sections. See the
STOPW note below this list.
↕ Selects the current item like
INPUT
Leaves alpha mode.
Calls the programmable command ENTER described in the IOP.
Remarks (see p. 74 for general information)
Works like # but also clears
only for 1 ≤ n ≤ 9 .
  
= Y , or
Edition 3.1
y . The shortcut works
for 'no' will be ignored.

below.
Page 119 of 211