Clearing Storage Registers; Storage Register Arithmetic - HP 0012C-90001 User Manual

24 24 Section 1: Getting Started Section 1: Getting Started
24 24 Section 1: Section 1: Getting Started Getting Started
Later that same day ...
Keystrokes Keystrokes
Keystrokes Keystrokes
;
:1
6
:2
+

Clearing Storage Registers

Clearing Storage Registers Clearing Storage Registers Clearing Storage Registers
To clear a single storage register — that is, to replace the number in it with
zero — merely store zero into it. You need not clear a storage register before
storing data into it; the storing operation automatically clears the register before
the data is stored.
all
To clear storage registers at once — including the financial registers, the stack
registers, and the LAST X register — press fCLEARH.
display.
All storage registers are also cleared when Continuous Memory is reset (as
described on page 70).

Storage Register Arithmetic

Storage Register Arithmetic
Storage Register Arithmetic Storage Register Arithmetic
Suppose you wanted to perform an arithmetic operation with the number in the
display and the number in a storage register, then store the result back into the
same register without altering the number in the display. The hp 12c enables you
to do all this in a single operation:
1. Press ?.
2. Press +, -,
3. Key in the register number.
When storage register arithmetic is performed, the new number in the register is
determined according to the following rule:
*
CLEARH is not programmable.
Display Display
Display Display
2,500.00
Turns the calculator back on.
3,250.00
Recalls the cost of the computer to the
display.
19,500.00
Multiplies the quantity ordered to get
the cost of the computers.
2,500.00
Recalls the cost of the printer to the
display.
22,000.00 Total invoice.
, or z to specify the desired operation.
This also clears the
*