Operation Parameter - Baxi HP40 MB Series User's Operation Manual

The service call can show the service phone or mobile
number.The installer can input the phone number.See
''FOR SERVICEMAN''.
SERVICE INFORMATION
SERVICE ERROR
PARAMETER DISPLAY
CALL CODE
PHONE NO. ******************
MOBILE NO. ******************
It also displays the associated error code.
SERVICE INFORMATION
SERVICE ERROR
PARAMETER DISPLAY
CALL CODE
E2 #00
E2 #00
E2 #00
E2 #00
ENTER
Press the page will appear:
SERVICE INFORMATION
SERVICE ERROR
PARAMETER DISPLAY
CALL CODE
E2 #00
E2 #00
E2 #00
E2 #00
ENTER
Press to show the meaning of the error code
E2 communication fault between
controller and indoor unit
Please contact your dealer.
CONFIRM
INFORMATION
A total of eight fault codes can be recorded.
The parameter function is used to display the main
parameters. They are displayed on two pages:
14:10 01-01-2018
14:00 01-01-2018
13:50 01-01-2018
13:20 01-01-2018
1/2
14:10 01-01-2018
14:00 01-01-2018
13:50 01-01-2018
13:20 01-01-2018
#00
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
ROOM SET TEMP.
MOBILE NO.
MAIN SET TEMP.
TANK SET TEMP
ROOM ACTUAL TEMP.
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
MAIN ACTUAL TEMP.
TANK ACTUAL TEMP.
The DISPLAY function is used to set the interface:
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
TIME
DATE
LANGUAGE
BACKLIGHT
ENTER
SERVICE INFORMATION
SERVICE ERROR
CALL CODE
BUZZER
SCREEN LOCK TIME
LANGUAGE
SMART GRID RUNNING TIME
ON/OFF
Use to enter and use ''◄ '', ''► '', ''▼ '', ''▲'' to scroll.

6.8 Operation Parameter

This menu is for installer or service engineer reviewing the
operation parameter.
• At home page, go to ''MENU'' > ''OPERATION PARAMETER''.
. There are nine pages for the operating
• Press
parameters, as follows. Use ''▼ '', ''▲'' to scroll.
• Press»►» and «◄» to check slave units' operation parameters
in cascade system. The address code in the upper right corner
will change from «#00» to «#01»,»#02» etc. accordingly.
19
1/2
PARAMETER DISPLAY
26ºC
55ºC
56ºC
55ºC
2
4ºC
2/2
PARAMETER DISPLAY
26ºC
55ºC
1/2
PARAMETER DISPLAY
12:00
08-08-2018
EN
ON
2/2
PARAMETER DISPLAY
ON
120SEC
2 Hrs
ON