Domestic Hot Water(Dhw) - Baxi HP40 MB Series User's Operation Manual

Press . The following page will appear:
ECO MODE SET
ECO MODE SET TYPE:
1 2 3 4 5
CONFIRM
Use '◄ '', ''► scroll .Press
The following page will appear:
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
CURRENT STATE
ECO TIMER
START
END
ON/OFF
Use to turn ON or OFF,and use '▼'', ''▲'' to scroll.
PRESET TEMPERATURE
PRESET
WEATHER
TEMP.SET
TEMP.
CURRENT STATE
ECO TIMER
START
END
ADJUST
When the cursor is on the "START" or on the "END",you
can use ''◄,''► '', ''▼'', ''▲'' to scroll and use ''▼'', ''▲''
to adjust the time.
INFORMATION
• ECO MODE SET have two kinds of curves :
1. the curve of the high temperature setting for
heating,
2. the curve of the low temperature setting for
heating,
It only uses the curve of the high temperature
setting for heating, if the high temperature is
set for heating. It only uses the curve of the
low temperature setting for heating, if the low
temperature is set for heating.
• See ''FOR SERVICEMAN''>''HEAT MODE
SETTING'' in «Installation, User and Service
Manual».
• The desired temperature (T1S) cannot be
adjusted, when the ECO mode is ON.
• You can select the low or high temperature
setting for heating to see the "Table 1~2".
• If ECO MODE is ON and ECO TIMER is OFF,
the unit runs ECO mode all the time.
• If ECO MODE is ON and ECO TIMER is ON, the
unit runs ECO mode according to the start time
and end time.
6 7 8 9
to select.
ECO
MODE
OFF
OFF
08:00
19:00
ECO
MODE
OFF
ON
08:00
19:00

6.3 Domestic Hot Water(DHW)

DHW mode typically consists of the following :
1) DISINFECT
2) FAST DHW
3) TANK HEATER
4) DHW PUMP
6.3.1 Disinfect
The DISINFECT function is used to kill legionella bacteria.
In disinfect function the tank temperature will reach
65~70 Cº forcely. The disinfect temperature is set in FOR
SERVICEMAN.See ''FOR SERVICEMAN'' > ''DHW MODE''
> ''DISINFECT'' in «Installation, User and Service Manual».
Go to ''MENU'' > ''DOMESTIC HOT WATER'' >
''DISINFECT''. Press
DOMESTIC HOT WATER（DHW
DIS-
INFECT
CURRENT STATE
OPERATE DAY
START
ON/OFF
DOMESTIC HOT WATER（DHW）
DIS-
INFECT
CURRENT STATE
OPERATE DAY
START
ON/OFF
Use ''◄,''► '', ''▼ '', ''▲'' to scroll and use ''▼'', ''▲'' to
adjust the parameters when setting ''OPERATE DAY'' and
''START''. If the OPERATE DAY is set FRIDAY and the
START is set 23:00, the disinfect function will be active on
23:00 Friday.
If the disinfect function is running,the following page will
appear:
11
. The following page will appear:
FAST TANK DHW
DHW HEATER PUMP
ON
FRI
23:00
FAST TANK DHW
DHW HEATER PUMP
OFF
FRI
23:00