Baxi HP40 MB Series User's Operation Manual page 12

PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
ZONE1 C-MODE LOW TEMP.
ZONE1 H-MODE LOW TEMP.
ZONE2 C-MODE LOW TEMP.
ZONE2 H-MODE LOW TEMP.
ON/OFF
INFORMATION
• WEATHER TEMP. SET have four kinds of
curves :1.the curve of the high temperature
setting for heating,2.the curve of the low
temperature setting for heating, 3.the curve of
the high temperature setting for cooling ,4.the
curve of the low temperature setting for cooling.
It only uses the curve of the high temperature
setting for heating, if the high temperature is set
for heating.
It only uses the curve of the low temperature
setting for heating, if the low temperature is set
for heating.
It only uses the curve of the high temperature
setting for cooling, if the high temperature is set
for cooling.
It only uses the curve of the low temperature
setting for cooling, if the low temperature is set
for cooling.
• See ''FOR SERVICEMAN''> ''COOL MODE
SETTING'' and > ''HEAT MODE SETTING'' in
«Installation, User and Service Manual».
• The desired temperature (T1S) cannot be
adjusted, when the temperature curve is set ON.
• If you want to use heat mode in zone 1 ,you select
''ZONE1 H-MODE LOW TEMP''. If you want to use
cool mode in zone 1, you select ''ZONE1 C-MODE
LOW TEMP''. If you select ''ON'', the following page
will appear:
WEATHER TEMP. SET
WEATHER TEMP. SET TYPE:
1 2 3 4 5
CONFIRM
Use ' ◄ '', '' ► ' 'to scroll .Press
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
ZONE1 C-MODE LOW TEMP.
ZONE1 H-MODE LOW TEMP.
ZONE2 C-MODE LOW TEMP.
ZONE2 H-MODE LOW TEMP.
ON/OFF
1/2
ECO
MODE
OOFF
OFF
OFF
OFF
6 7 8 9
to select.
ECO
MODE
OON
OFF
OFF
OFF
10
• If the weather TEMP.SET is activated, the desired
temperature can not be adjusted on the interface.Press
the ''▼'', ''▲'' to adjust the temperature on home page.
The following page will appear:
Weather temp.set function ison.
Do you want to turn it off?
NO
CONFIRM
Move to "NO", press to come back to home page,move
to "YES", press to reset the WEATHER TEMP. SET.
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
ZONE1 C-MODE LOW TEMP.
ZONE1 H-MODE LOW TEMP.
ZONE2 C-MODE LOW TEMP.
ZONE2 H-MODE LOW TEMP.
ON/OFF
INFORMATION
i
By choosing "WEATHER TEMP. SET TYPE: 9",
you can use a personalized heating curve.
Its parameters can be modified using "HEAT
MODE SETTING" (refer to the 10.5.3 chapter in
"Installer, user and service manual").
Example of a personalization:
- 3.8 T1SetH1 = 60 °
- 3.9 T1SetH2 = 30 °
- 3.10 T4H1 = 0 °
- 3.11 T4H2 = 16 °
6.2.3 ECO MODE
ECO MODE is used to save energy. Go to ''MENU'' >
''PRESET TEMPERATURE'' > ''ECO MODE''. Press
The following page will appear:
PRESET TEMPERATURE
PRESET WEATHER
TEMP. TEMP.SET
CURRENT STATE
ECO TIMER
START
END
ON/OFF
YES
ECO
MODE
OFF
OFF
OFF
OFF
.
ECO
MODE
OFF
OFF
08:00
1 00:9