Using Home - Baxi HP40 MB Series User's Operation Manual

3 USING HOME PAGES
When you turn on the wired controller, the system will enter the language selection page, You can choose your preferred
language, then press to enter the home pages. If you don't press
selected language.
You can use the home pages to read out and change settings that are meant for daily usage. What you can see and do on the
home pages is described where applicable. Depending on the system layout, the following home pages may be possible:
• Water flow desired temperature
• Room desired temperature
• Domestic hot water temperature
home page1 ：
If the WATER FLOW TEMP. is set YES and ROOM TEMP. is set NON.(See ''FOR SERVICEMAN'' > ''TEMP. TYPE SETTING
''in'' Installationan downer's manual ''). The system functions include floor heating and domestic water, SETTING'' in
''Installation and home page 1 will appear:
Water flow desired temperature
home page2 ：
If the WATER FLOW TEMP. is set NON and ROOM TEMP. is set YES (See ʺFOR SERVICEMANʺ > ʺTEMP. TYPE
SETTINGʺ on ʺInstallation and owner's manualʺ). The system functions include floor heating and domestic hot water,
home page 2 will appear:
Room desired temperature
NOTE
The wired controller should be installed in the floor heating room to check the room temperature.
in 60 seconds, the system will enter in the currently
the system layout 1
UI
SV1
the system layout 2
UI
SV1
3
FHL1FHL2...FHLn
FFHL1FHL2.F..HLn