3.20 JTAG Connector
The board provides UPDI signals on the JTAG connector. The PX30-uQ7 does not support JTAG, but the ATtiny (see Section
10.4.5 Companion Controller 2) can be flashed over JTAG connector pins.
v1.0.1-8-g2dd91c8
Page 18
Fig. 3.18: MISC header
Fig. 3.19: JTAG header
JTAG header
Function
TDI
UPDI-TX
TDO
UPDI-RX