Technical Specifications - EuroLite LED KRF-140 User Manual

Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Sound-control:
Maximum ambient temperature T
Max. housing temp. T
C
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Type of LED:
Number of LEDs:
Dimensions (LxWxH):
Weight:
Please note: All information is subject to change without prior notice. 20.05.2015 ©
100-240 V AC, 50/60 Hz ~
20 W
via built-in microphone
: 45° C
a
(steady state): 60° C
0.1 m
0.5 m
F 1 A, 250 V
5 mm
140 (35R, 35G, 35B, 35A)
90 x 370 x 150 mm
1.5 kg
19/19 00091586.DOC, Version 1.0