Connecting The Products; Connecting The Products To An Audio Input - Sennheiser SpeechLine IS Series Instruction Manual

Connecting the products

MEB 114
MEB 114-S MZS 31
MZT 30 MZT 30-L MEB 102
MEB 104 MEB 104-L MEB 102-L
MAT 133 MAT 133-S MAT 153-S
26 | SpeechLine IS microphone series
Connecting the products

Connecting the products to an audio input

There are two ways to connect the products of the SpeechLine IS
microphone series to a suitable audio input:
A) Connection to a mixing console, an auto mixer or a digital signal
processor (DSP) using shielded cables
B) Connection to a mixing console via the MAS 133 inline switch box and
the MAS 1 microphone button using shielded XLR cables
A) Connecting a microphone to a mixing console | an auto mixer | a digital
signal processor (DSP)
Use a suitable shielded cable (e.g. XLR-XLR, XLR-terminal) to connect
the microphone to the mixing console, the auto mixer or the DSP. For
more information on the connections, refer to the instruction manual
of your DSP.
Lay all cables in such a way that other persons cannot trip over them
and injure themselves.
MEB 114 MEB 114-S
TINY
XLR-3
MEB 102 MEB 104
MEB 102-L MEB 104-L
MAT 133 MAT 133-S MAT 153-S
XLR-3 cable
XLR-3
not included
MZH 30xx MEG 14-40
MZH 30xx-L MEG 14-40L