Putting The Mkh 8060 Into Operation; Connecting The Microphone; Attaching The Microphone - Sennheiser MKH 8060 Instruction Manual

Putting the MKH 8060 into operation

Connecting the microphone

Connection data of the MKH 8060:
• 48 V ± 4 V phantom powering (P48, as per IEC 61938)
• XLR-3 connector, balanced
To connect the MKH 8060 to a mixing console or recording device:
Connect the socket of the microphone cable to the microphone.
Connect the connector of the microphone cable to the mixing console or
recording device.

Attaching the microphone

Select the suitable mounting thread:
• Without thread insert: 5/8" thread
• Thread insert: 3/8" thread
Screw the microphone clamp
Place the microphone with its back end into the microphone clamp: Make
sure that the lateral slots are
Orient the microphone together with the microphone clamp and fix them by
screwing the wing screw tight.
4
Putting the MKH 8060 into operation
4 to a stand.
not covered.
MKH 8060 | 15