Table of Contents
Advertisement
Mounting and installing the products
MEB 102
MZH 30xx-L
MZS 31
MZT 30
ME 34|35|36
MZH 30
MZC 30
22 | SpeechLine
IS microphone series
Mounting microphones to the ceiling
Some microphones of the IS series can also be mounted to a ceiling panel
or wooden board of a suspended ceiling.
A
MEB 102
C
MZC 30
+
MZT 30
A) Mounting the MEB 102 boundary layer to the ceiling
Once you have chosen a position for the product (see page 16):
Drill a hole with a diameter of 25 mm through the ceiling panel or
wooden board (plate thickness 10 mm - 65 mm).
Slide the first rubber ring over the threaded bolt of the microphone
button and then insert the microphone into the drilled hole.
Slide the second rubber ring over the threaded bolt and tighten the hex
nut.
Connect a suitable cable (see page 26) and lay the cable.
B
+
XLR-3
MZH
3015w
+
+
ME 36
MZH 30
10 mm –
65 mm
25 mm
MZT 30
ME 34
ME 35
Advertisement
Table of Contents
