Wireless Wake On Lan] S N; Justscan Toggle] S N; Holiday Schedule Mode] S N, 1A; Holiday Schedule] S N, 1B - LG 75XE3C Owner's Manual

62
84. [Wireless Wake-on-LAN] (Command: s n, 90)
Sets Wireless Wake-on-LAN.
Transmission
(s)(n)( )(Set ID)( )(9)(0)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(9)(0)(Data)(x)
* This feature may not be supported in certain models.
85. [JustScan Toggle] (Command: s n, 91)
Sets JustScan.
Transmission
(s)(n)( )(Set ID)( )(9)(1)( )(Data)(Cr)
Data 00: Off
01: On
Acknowledgement
(n)( )(Set ID)( )(OK/NG)(9)(1)(Data)(x)
* This feature may not be supported in certain models.
86. [Holiday Schedule Mode] (Command: s n, 1a)
Turns Holiday Schedule mode on or off.
Transmission
(s)(n)( )(Set ID)( )(1)(a)( )(Data)(Cr)
Data 00: Holiday Schedule off
01: Holiday Schedule on
* This feature does not work if the current time is not set.
* Depending on the model, this feature may not be supported.
Acknowledgement
(n)( )(Set ID)( )(OK/NG)( )(1)(a)( )(Data)(x)
87. [Holiday Schedule] (Command: s n, 1b)
Configures the Holiday Schedule.
Transmission
(s)(n)( )(Set ID)( )( )(1)(a)
( )(Data1)( )(Data2)( )(Data3)( )(Data4)(Cr)
Data1
1. f1~f7 (Data Reading Functions)
f1: Reads data of 1st Holiday Schedule
f2: Reads data of 2nd Holiday Schedule
f3: Reads data of 3rd Holiday Schedule
f4: Reads data of 4th Holiday Schedule
f5: Reads data of 5th Holiday Schedule
f6: Reads data of 6th Holiday Schedule
f7: Reads data of 7th Holiday Schedule
2. FF: Reads all stored lists
3. e1~e7 (Deletes one index), e0 (Deletes all indexes)
e0: Deletes all Holiday Schedules
e1: Deletes 1st Holiday Schedule
e2: Deletes 2nd Holiday Schedule
e3: Deletes 3rd Holiday Schedule
e4: Deletes 4th Holiday Schedule
e5: Deletes 5th Holiday Schedule
e6: Deletes 6th Holiday Schedule
e7: Deletes 7th Holiday Schedule
4. 01~0c: Month 01 to 12 (Start Month)
Data2 01–1F: Day 01 to 31 (Start Day)
Data3 01–0c: Month 01 to 12 (End Month)
Data4 01–1F: Day 01 to 31 (End Day)
* If you want to read or delete the configured Holiday Schedule lists, set
[Data2][Data3][Data4] to FF.
* When reading all configured Holiday Schedule lists, set [Data1][Data2]
[Data3][Data4] to FF.
Example1: sn 01 1b f1 ff ff ff – Reads the 1st index data in the Holiday
Schedule.
Example2: sn 01 1b ff ff ff ff – Reads all index data in the Holiday
Schedule.
Example3: sn 01 1b e1 ff ff ff – Deletes the 1st index data in the Holiday
Schedule.
Example4: sn 01 1b 01 07 0c 18 – Adds Holiday Schedule from January 7
to December 24.
* Schedules set beforehand are not added.
* This feature does not work if the current time is not set.
* Depending on the model, this feature may not be supported.
Acknowledgement
(s)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x)