Server; Set Automatically; Server Ip Type; Server Ip - LG 75XE3C Owner's Manual

Server

Set Automatically

• The monitor settings will be set automatically so that the SuperSign server can search it.

Server IP Type

• Select the IPv4 or the IPv6 type.

Server IP

• This is a menu where you can set an IP address for the SuperSign server.

Server Status

• Server Status displays the status of the connection between your monitor and the SuperSign server.
• Not Connected - indicates that your monitor is not connected to the SuperSign server.
• Waiting for Approval - indicates that your monitor is connected to the SuperSign server but not yet approved.
• Rejected - indicates that your monitor is connected to the SuperSign server but has been rejected.
• Connected - indicates that your monitor is connected to the SuperSign server and has been approved.

Port Number

• Sets the SuperSign server's port. (Supported on SuperSign Premium 1.0 or later)

Secured Connection

• You can choose whether to use security protocols when connecting to the SuperSign server. (Supported on
SuperSign Premium 1.0 or later)

Control Server IP Type

• Select the IPv4 or the IPv6 type.

Control Server IP

• This menu is to set the IP of the SuperSign Control Server.

Control Server Port

• This menu is to set the port of the SuperSign Control Server.

Control Server Status

• This displays the status of connection with the SuperSign Control Server.
• Not Connected: When not connected to the SuperSign Control Server
• Waiting for Approval: When connected to the SuperSign Control Server but not approved
• Connected: When connected to the SuperSign Control Server and approved
27