Table of Contents
Advertisement
■
Air conditioner main screen
This screen is for confirming or changing settings that are used every day, such as temperature, operating mode,
fan speed and wind direction.
You can check the current state according to the setting items on the bottom of the screen.
You can switch the setting items by pressing [
NOTE
• The temperature setting is changed in the main screen.
• Functions and items that cannot be set are not shown, according to the model.
• While changing settings, if you press [
returns.
Switching between the detailed display and simple display
(air conditioner main screen only)
You can change the main screen to the simple display, depending on the "Display mode" setting. For details on
changing "Display mode", refer to "Display setting" in "Initial setting" in the Installation Manual.
The detailed display is set as the factory default setting.
Detailed display (factory default setting)
Simple display
] and [
], and change them by pressing [
Setting items
• The currently selected item is highlighted in black.
• You can switch the items by pressing [
Return] or if there are no button operations for about 60 seconds, the main screen
(*1)
In the simple display, only some icons are shown.
(*1)
*1: "
Preparing to heat"
Displayed when "Heat" operation starts or when the defrost
cycle is operating.
While the icon is displayed, the indoor fan stops or the "Fan"
turns on.
"
Preparing to operate"
This may be displayed on some models.
"
Preparing to operate ventilation"
Displayed while the air to air heat exchanger is on
standby.
While this is being displayed, the air to air heat exchanger
remains stopped.
– 8 –
Owner's Manual
] and [
] and [
].
].
EN
Advertisement
Table of Contents
