Wahl Genio Pro 1874 Operating Manual page 12

E N G L I S H
Charging stand
Dimensions
with accessories (LxWxH):
Weight:
Plug-in transformer
Type
Power consumption:
Operating voltage:
de
Plug-in transformer
en
Manufacturer:
fr
it
Type
es
Input voltage:
Input AC frequency:
pt
Output voltage:
Output current:
nl
Output power:
Average active efficiency:
da
No-load power consumption: 0.04 W
sv
Type
no
Input voltage:
Input AC frequency:
fi
Output voltage:
Output current:
tr
Output power:
Average active efficiency:
pl
No-load power consumption: 0.04 W
cs
Manufacturer:
sk
hr
Type
hu
Input voltage:
Input AC
sl
frequency:
Output voltage:
ro
Output current:
Output power:
bg
Average active efficiency:
No-load power consumption: 0.04 W
ru
Operating conditions
uk
Ambient temperature:
et
The appliance is safety insulated and radio screened. It meets
the requirements of EU Electromagnetic Compatibility Directive
lv
2014/30/EC and Machinery Directive 2006/42/EC.
lt
el
12
ar
119 x 91 x 57mm
130 g
Adapter 6000
max. 12 W
100 – 240 V AC / 50/60 Hz
Ten Pao Industrial Co., Ltd.
Room 10-11,6/F., Kwong Sang Hong
Centre, 151-153 Hoi Bun Road, Kwun
Tong, Kowloon, Hong Kong
Adapter 6000
Euro plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.3 %
Adapter 6000
UK plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.1 %
GOLD MARK (CHINA) HOLDINGS LTD
Unit 1706,17/F.,Vanta Industrial
Centre, 21-33 Tai Lin Pai Road, Kwai
Chung, N.T., Hong Kong
Adapter 6000 A (VI)
Euro/UK plug
100 – 240 V
50/60 Hz
5.9 V
1.5 A
8.85 W
79.7 %
0°C – +40°C
Operation
Preparation
Keep the packaging material for safe storage or trans-
port later.
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Please note that we perform quality tests on all of our
products. Therefore, you may find small synthetic hair
on the blade set or on the machine. However, we assure
you that your clipper and cutting blade / blade set are
unused.
Safety
Caution! Damage due to incorrect power supply.
f Only operate the appliance with the voltage stated
on the nameplate.
Charging the battery
This cordless hair clipper is supplied with two battery packs. While
the hair clipper is in use, the second battery pack can be recharged
on the charging stand. This means that the hair clipper is always
ready for use.
1. Connect the appliance plug of the plug-in transformer to the
plug socket of the charging stand (Fig. 2ⓐ).
2. Connect the plug-in transformer to the mains socket (Fig. 2ⓑ).
3. Insert the battery pack into the recess of the charging stand
(Fig. 4). The charging process starts.
·
During charging, the charging indicator flashes red.
·
The second battery can remain in the charging stand
so that a charged battery pack is always available.
4. Once the charging process has finished, the charging indicator
lights up green.
Battery operation
1. Switch on the appliance using the on/off switch, and switch off
after use (Fig. 5ⓐ/ⓑ).
·
If the blade set is improperly maintained, the operat-
ing time can be reduced considerably.
·
While in operation with a fully charged battery, the
charging indicator lights up green.
·
Whenever the charging indicator lights up red
during operation, the battery pack needs to be
recharged. You can now use the charged replace-
ment battery pack.
To recharge the battery:
1. Switch off the appliance using the on/off switch (Fig. 5ⓑ).
2. Press the release buttons on the side and remove the battery
pack (Fig. 3ⓐ).