OT Bioelettronica Sessantaquattro+ User Manual page 14

The three LEDs are independent, and the information provided from each one is displayed cyclically by
a given number of blinks. In Table 7.1 the different states and related number of LEDs blinks are
highlighted.
N. of
blinks
White
WiFi active
LED
Blue LED Waiting for a trigger
Data lost during Wifi
Red LED
transfer
TAB. 7.1: Relation between the number of blinks of each LED and Sessantaquattro+ states.
White LED
This LED indicates the state of the WiFi and data transfer through a TCP socket.
Slightly different information is provided depending on the role of Sessantaquattro+.
When acting as an access point:
a) one blink of the white LED indicates that the network has been generated and is available to connect
to another device;
b) two blinks indicate that a device is connected to the network generated by Sessantaquattro+.
When configured to connect to an external WiFi network:
a) one blink indicates that Sessantaquattro+ is active and is searching for one network
b) two blinks indicate that Sessantaquattro+ has successfully connected to an external network
1
Connected to a
network
Recording data on SD
MicroSD card error
Sessantaquattro+ User Manual v.2.0 – March 2023
2 3
Connected to a TCP
socket
-
Low battery
14
4
Transferring data
-
-