Table of Contents
Advertisement
6
TECHNICAL SPECIFICATIONS
Sessantaquattro+ is a battery powered device designed to guarantee a high safety level for the patient
and the operator in all operating conditions. The insulation between Sessantaquattro+ and the PC for
real time data display and storage, is intrinsically achieved by the wireless data transfer and
communication. The same connector is used for electrode interface and battery recharging avoiding the
chance to power the Sessantaquattro+ device from an external source when it is connected to the
patient.
The connector for the auxiliary inputs is intended for the interface with other floating devices
(goniometers, accelerometers or amplifiers for other biological signals). The connection must be done
in compliance with the European standard EN 60601-1-1 on medical devices. Table 6.1 shows the list of
available adapters and their connections.
Adapter
Available connections
CUSB01SP USB type C, for battery recharging
Eight four poles 3.5 mm jacks for connection of two bipolar electrode pairs (16 electrodes pairs in
AD8x1SP
total). An additional four poles 3.5 mm jack for two auxiliary signals. 2 mm female banana for the
patient reference connection.
16 pin connector for linear electrode arrays. An additional four poles 3.5 mm jack for two auxiliary
AD1x16SP
signals. 2 mm female banana for the patient reference connection.
Two 32 pin connectors for 32 electrode matrices. An additional four poles 3.5 mm jack for two auxiliary
AD2x32SP
signals. 2 mm female banana for the patient reference connection.
70 pin connectors for 64 electrode matrices or 64 electrode EEG caps. An additional four poles 3.5
AD1x64SP
mm jack for two auxiliary signals. 2 mm female banana for the patient reference connection.
TAB. 6.1: List of Sessantaquattro+ available adapters
Sessantaquattro+ User Manual v.2.0 – March 2023
10
Advertisement
Table of Contents
