Agency Listings - Honeywell Fire-Lite Alarms ES-200X User Manual

Whitney Even on 06/22/2022
Indoor Selectable-
Output Horns,
Strobes, and
Horn Strobes for
Wall Applications
System Sensor L-Series audible visible notification
products are rich with features guaranteed to cut
installation times and maximize profits with lower
current draw and modern aesthetics.
Features
• Updated Modern Aesthetics
• Small profile devices for Horns and Horn Strobes
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 30
candela
• Field-selectable candela settings on wall units:
15, 30, 75, 95, 110, 135, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Mounting plate for all standard and all compact wall units
• Mounting plate shorting spring checks wiring continuity before
device installation
• Electrically Compatible with legacy SpectrAlert and SpectAlert
Advance devices
• Compatible with MDL3 sync module
• Listed for wall mounting only

Agency Listings

S5512 FM approved except
S4011 for ALERT models
3057383, 3057072
7125-1653:0504
7135-1653:0503
The System Sensor L-Series offers the most versatile and
easy-to-use line of horns, strobes, and horn strobes in the industry
with lower current draws and modern aesthetics. With white and red
plastic housings, standard and compact devices, and plain, FIRE,
and FUEGO-printed devices, System Sensor L-Series can
meet virtually any application requirement.
The L-Series line of wall-mount horns, strobes, and horn strobes
include a variety of features that increase their application versatility
while simplifying installation. All devices feature plug-in designs
with minimal intrusion into the back box, making installations fast
and foolproof while virtually eliminating costly and time-consuming
ground faults.
To further simplify installation and protect devices from construction
damage, the L-Series utilizes a universal mounting plate for all
models with an onboard shorting spring, so installers can test wiring
continuity before the device is installed.
Installers can also easily adapt devices to a suit a wide range
of application requirements using field-selectable candela settings,
automatic selection of 12- or 24-volt operation, and a rotary switch
for horn tones with two volume selections.